Customer Service Hotline:13585310218

Welcome to our website   WEBSITE 




Products are widely used in different fields such as petroleum, chemical, electric power,
refrigeration, food, medicine, etc.


Slotting machine operating procedure

Slotting machine operating procedure

Page view
1 Before starting the machine, you must carefully check the tool and nut and the screws of each part. If it is loose, it must be tightened in time;

2 Pay attention to the cutting direction when installing the tool, and do not reverse it;

3 The main tool is turned clockwise;

1 Before starting the machine, you must carefully check the tool and nut and the screws of each part. If it is loose, it must be tightened in time;

2 Pay attention to the cutting direction when installing the tool, and do not reverse it;

3 The main tool is turned clockwise;

4 Before feeding the groove, confirm whether the pneumatic device is open and press the workpiece on the movable push table and close the positioning plate, and the hand is not allowed to approach the knife edge;

5 When the machine fails, the power should be cut off immediately, and the operation should be stopped. Special personnel should be assigned to make repairs and adjustments, and the machine tool is not allowed to run sick;

6 Before processing, the material should first check whether there are nails, sandstone joints, etc. on the tool to prevent the damaged joints from flying out and hurting people;

7 Machine cleaning, cleaning of lubricants, and removal of saw blades and cuttings, etc., must be cut off from the machine;

8 The machine tool must be operated, adjusted and repaired by designated personnel. It is strictly forbidden for those who are not familiar with the machine tool;

9 Workers should wear protective equipment such as earplugs and eye protection when operating.

10 Maintenance of the machine is carried out in accordance with the “Operation, Maintenance and Maintenance System”.